F250 High Pressure Oil Hose

Submitted: Monday, Jun 29, 2009 at 01:05
ThreadID: 125810 Views:3251 Replies:3 FollowUps:2
This Thread has been Archived
Met a fellow today who has a 2002 F250 with 250,000K on the clock.
He has had very few problems with the truck except he has blown 2 high pressure hoses to the injector pump. Ford Australia replacement part cost is a wopping $980 for a small 30cm hose.
My question is has anyone had this problem and is it worth importing one to carry as a spare?

Rosco
Back Expand Un-Read 0 Moderator

Reply By: F Troop - Monday, Jun 29, 2009 at 19:29

Monday, Jun 29, 2009 at 19:29
yep blew one at 150k,s and yep $980.
Graham
AnswerID: 578151

Follow Up By: The Boondockers - Tuesday, Jun 30, 2009 at 04:09

Tuesday, Jun 30, 2009 at 04:09
Graham,
What year is your F250?
Did the hose blow because it was rubbing on something?

Rosco
0
FollowupID: 851451

Reply By: Itldoo - Wednesday, Jul 01, 2009 at 06:32

Wednesday, Jul 01, 2009 at 06:32
Hi all,
Quite surprised at the cost. Can you not have one made by the hose specialists.
such as Pirtec.
Phil
AnswerID: 578152

Follow Up By: The Boondockers - Wednesday, Jul 01, 2009 at 17:57

Wednesday, Jul 01, 2009 at 17:57
I was told he tried that and the thread is an unusual one and it could not be made up locally.

Rosco
0
FollowupID: 851452

Reply By: Jorgo - Friday, Jul 10, 2009 at 21:37

Friday, Jul 10, 2009 at 21:37
Hi Rosco
With the blown hose situation, could I enquire if the motors had been chipped or does it happen to stock standard F250.
Darryl
Darryl & Robbie

Member
My Profile  Send Message

AnswerID: 578153

Our Sponsors