mchitch
Submitted: Friday, Jan 29, 2016 at 21:15
ThreadID:
131495
Views:
3294
Replies:
3
FollowUps:
3
This Thread has been Archived
Frank Aus
Hi, is anyone using the automatic mchitch,
are there any issue,s
Thanks in advance
Frank
Reply By: Flavs - Friday, Jan 29, 2016 at 21:31
Friday, Jan 29, 2016 at 21:31
Hi Frank
If you look at Thread ID 131448 and 131476 there has been some recent discussion on hitches including the McHitch
Cheers
Noel
AnswerID:
595623
Follow Up By: Flavs - Saturday, Jan 30, 2016 at 13:36
Saturday, Jan 30, 2016 at 13:36
Hi Frank
My appologies, I referred you to 2 members only posts and did not realise that you were no longer a financial member.
I am sure members will give you the feedback you are after. I have the original 6 tonne McHitch & have been happy with it. Had it since 2010.
Cheers
Noel
FollowupID:
864344
Follow Up By: Frank Aus - Saturday, Jan 30, 2016 at 18:25
Saturday, Jan 30, 2016 at 18:25
Thanks for that All, Do you really need the roller bearings for the WDH.
FollowupID:
864357
Follow Up By: Flavs - Saturday, Jan 30, 2016 at 19:48
Saturday, Jan 30, 2016 at 19:48
Hi Frank
I do not have the roller bearing setup on mine. Quite happy with the hitch and the standard wdh.
Cheers
Noel
FollowupID:
864359
Reply By: Member - Roachie - Saturday, Jan 30, 2016 at 08:32
Saturday, Jan 30, 2016 at 08:32
Frank,
I've recently fitted a 6 tonne version to my BT (only owned the BT for almost 2 weeks) and a couple of months ago I fitted the 3.5tonne version to my Ultimate Offroad Camper trailer.
Scroll down a few posts and you'll see my pic and a LOT of comments about my decision.
I also posted the same info on the Bustracker
Forum, but my thread was locked by the moderator.
Cheers
Bill
AnswerID:
595639
Reply By: Toyman - Saturday, Jan 30, 2016 at 10:50
Saturday, Jan 30, 2016 at 10:50
Extremely happy with mine, no issues.
Cheers
John
AnswerID:
595646